Contact Us
Position:Home > News > CompanyNews

The new cloth note Close contact part should ensure smooth

2015-9-15      View:
Close contact part should ensure smooth 1, filter cloth around the filter plate pressure, cannot produce wrinkles, avoid being filter plate extrusion filter caused by damage or slurry leakage.
2, to avoid retaining ring tail too long may extend filter plate pressure part and damage the cloth, or resulting in mud leakage, should be cut short tail.
3, the installation time, need to pay attention to no foreign body or larger granular sludge filter cloth and the filter plate between, large granular sludge or foreign body may in the plate, resulting in damage to the filter plate or cloth.
4, filter cloth installation should pay attention to the positive and negative (on the mud surface and on the surface of the mud), generally do not have special requirements, cloth fabric calendering of mud. Otherwise the installation errors will be adhered to the cloth easy to plug, low filtering efficiency.
5, the installation of the filter cloth, the ring is not available to the cloth lock tight, otherwise the residual pressure in the filter plate contact parts of the cloth in the sludge will not be automatic cleaning removed.
6, standby filter cloth should be stored in a cool and dry place, suggested that the dark shade cloth to be protected and avoid ultraviolet radiation, prevents the cloth material aging.
7, the installation of filter cloth before, need to install the support filter cloth, its role is in the mud, filter cloth is cake by gravity down rapidly from the possible friction filter plate convex surface wear is reduced to the lowest level, to protect the filter cloth, prolong the service life of the filter cloth and enhance filtering effect, support installation method of filter cloth can reference van cloth installation method, roughly the same.